Metal Bin >

Hot Dip Galvanized Steel Container 1100lt

Galvanized Container MCK 1100 With Dome Lid

Hot dip galvanized container MCK 1100 l

Hot-dip galvanised containers are intend for the collection of the solid household waste. They have 4 swivel wheels, two of them are brake wheels. The containers comply with the EN 840-3, EN 840-5 a EN 840-6 Standards.

1100 Lt.Metal Flat Lidded Galvanized Waste Container Metal Waste Container

TECHNICAL SPECIFICATIONS;

• Body mouth is surrounded with 25x50 mm U profile.
• The body was boiled without slag with the complete gas welding.
• The cover is plastered from a single piece of 1.5 mm sheet and provided to be durable and aesthetic.
• The opening handle on the cover is a lock with a snap, and it is reinforced with an internal strength-enhancing profile.
• The container is TS EN 840-3 Standard Certificate of Conformity.
• To the front surface; The name of the municipality, the figure of the Trash Thrower and the slogan Let's Keep Our Environment Clean is written.
• The body is curled from a 2 mm sheet of hair and its strength is increased by pressing the body and sides.
• The side of the body is bent 1.5 cm, grasping the body from the outside and the base corners and upper back mouth are radius.
• Lifting arms suitable for the lifting apparatus on the vehicle are 45x10 cm in size, drilled through 4 mm sheet metal, 16 mm round arm is welded to the body by boiling from below and above.
• The carrier has 4 wide tongs, 360º rotating 160x45 size tong sheet, at least 3.50 mm in size, according to TS EN 12532 standard wheel.
• Wheel connection plate is 4.00 mm.
• The container is manufactured in accordance with the Technical Drawing and Technical Specifications and 80-90 micron galvanized in accordance with the TS 914 EN IS0 1461 standard with the complete Hot Dip Galvanizing system.